iRopes igiya ta winch mai 12‑zaren tana ba da har zuwa 15× ƙarfin‑zuwa‑nauyin karfe kuma tana da nauyin kusan 0.4 lb/ft — kusan 80 % mafi sauƙi.
Abinda za ku samu – karatu na minti 5
- ✓ Har zuwa 15× ƙarin ƙarfi idan aka kwatanta da wayar karfe da ke da diamita ɗaya.
- ✓ Kimanin nauyin igiya 0.4 lb/ft (≈ 2 lb/ft don karfe) don rage nauyin mota.
- ✓ Haɗa igiyar synthetik da ta lalace cikin kusan minti 15 tare da fast fid.
- ✓ Samar da takardar shaidar ISO‑9001 don inganci da amintaccen ƙayyadaddun ƙima.
Mafi yawan ƙungiyoyin tseren ƙasa suna ɗaure kulle na gama gari kuma suna fatan alheri. Duk da haka, kullen iRopes da ya dace, wanda aka daidaita torque (akasin 12–15 Nm don aluminium), yana hana zamewa kuma yana kare igiya. Haɗa wannan da fast fid don haɗawa da igiya mai 12‑zaren Dyneema, za ku inganta sarrafawa, rage lalacewa, kuma ku yi gyare‑gyaren hanya da ƙwarin guiwa. Ku gano cikakken saitin da ke juya ceto mai haɗari zuwa canja wutar lantarki mai laushi da sauƙi.
kayan kulle igiyar winch – kulle igiyar ku zuwa drum
Da zarar kun fahimci yadda fid rope tool zai iya ceto layin da ya tsage, ɓangaren muhimmi na gaba shi ne tabbatar da igiyar ta makale sosai a drum ɗin winch. kayan kulle igiyar winch da aka yi daidai yana hana igiya zamewa, abin da ke bambanta tsakanin ceto mai tsabta da tsagewa mai haɗari.
Mahimman sassan da ma'anar
kayan kulle igiyar winch yawanci yana amfani da U‑bolt clamp da aka ƙarfafa a kan saddle mai siffa don raba nauyi a duk igiyar. Ana matse ƙwai guda biyu daidai gwargwado don tabbatar da haɗin zuwa drum ko wurin da aka daura.
Bayani kan dacewa
Yi amfani da wannan a matsayin jagorar misali, sannan ka tabbatar da girma a cikin littafin winch ɗinka da umarnin masana'antar kulle.
| Diamita drum | Layukan da suka dace |
|---|---|
| ≤ 3.5 in (small drums) | Synthetic 3/16"–5/16"; steel 3/16"–1/4" |
| 3.5–5 in (medium drums) | Synthetic 5/16"–7/16"; steel 5/16"–3/8" |
| ≥ 5 in (large drums) | Heavy‑duty synthetic (Dyneema, UHMWPE) up to 1/2"; steel 7/16"–1/2" |
Yadda ake saka kullen igiyar winch
Amsa tambayar da ake yawan yi “Yadda ake saka kullen igiyar winch?” – bi waɗannan matakai biyar masu sauri. Kowanne mataki ya ƙasa da kalmomi goma‑sha biyar don dacewa da tsarin featured‑snippet.
- Sanya kullen a wurin da aka daura drum tare da ƙarshen igiya.
- Saka igiyar a cikin hanyar saddle, a tsakiyar kuma madaidaici.
- Mika U‑bolt a kan igiya da kuma ta cikin saddle.
- Matsar da ƙwai daidai gwargwado (12–15 Nm na aluminum), da amfani da threadlocker.
- Sanya pre‑tension da 8–10 zagaye, sannan tabbatar da torque da daidaito.
Jerin dubawa don lafiya
Ko da mafi kyawun kulle na iya fadi idan ka yi watsi da dubawa na yau da kullum. Yi amfani da wannan jerin gajeren kafin kowace tafiya.
- Tabbatar da torque – tabbatar ƙwai an matse su cikin kewayon Nm da aka ƙayyade.
- Dubawa ta gani – duba ko akwai raɗaɗin bututun, igiyoyin da suka yanke, ko tsatsa.
- Jadawali – sake matse torque bayan kowane ja 10 ko a kowane wata idan an yi amfani da yawa.
- Kare igiya – tabbatar babu ƙusoshi masu kaifi da ke taɓa igiyar yayin da aka ɗora nauyi.
Da kullen ya kulle, igiyar za ta tsaya a kan drum, ta ba da damar fid rope tool ya magance kowanne haɗi da za ku buƙata daga baya. Sashen na gaba zai nuna yadda wannan kayan ke kammala gyare‑gyare a kan igiyoyin synthetik.
fid rope tool – sauri da amintaccen haɗa igiyar synthetik
Da kullen igiyar winch ya riga ya riƙe layin, kayan da ke juya igiyar synthetik da ta tsage zuwa sabon haɗi shine fid rope tool. Wannan na’ura mai ɗaukar hannu tana ba ku damar kammala gyara ba tare da komawa wurin gyara ba, ku ci gaba da tafiya a hanya.
“Fast Fid ya ba ni damar haɗa layin Dyneema cikin ƙasa da minti goma – ceto rayuwa idan na makale a cikin rami na laka.” – Jenna, masoyin 4×4.
Menene fid rope tool kuma menene ke musamman a ƙirar wire‑grip?
Fid rope tool ƙaramar na’ura ce da ke taimakawa haɗawa, tana ɗauke da aluminium billet da ke ƙunshe da wire‑grip fid mai kaifi. Grip ɗin na riƙe ƙwayoyin igiya ba tare da murɗa su ba, yana kiyaye ƙarfin Dyneema ko UHMWPE. Sikelin metric da aka gina a ciki yana ba ku damar auna tsawon ɓoyewa a wurin don daidaitaccen haɗin igiyar synthetik.
Mahimman fasaloli da suka dace a hanya
Fast fid yana haɗa abubuwa uku masu amfani: jikin aluminium mai ƙauracewa zamewa, sikeli mai auna 0–30 cm, da ƙofar da ke karɓar diamita igiya daga 3 mm zuwa 12 mm. Tsarin mai sauƙin share ƙazanta yana aiki da aminci a yanayin ƙura ko laka.
Yadda ake haɗa igiyar winch da fid (matakai 7)
- Yanke sashen da ya lalace da tsaye ta amfani da makera mai kaifi.
- Alama tsawon da ake buƙata don ɓoye da amfani da sikeli na fid.
- Shigar da fid cikin tsakiyar igiya a wurin alamar shigarwa.
- Rike ƙarshen igiya da ƙarfi ta hanyar wire‑grip.
- Jawo ƙarshen igiyar ta wuce don ƙirƙirar girman idon da ake so.
- Latsa igiyar don ɓoyewa daidai da santsi.
- Sanya pre‑tension kuma duba kafin dawowa aiki.
Shawarar kula, ajiya da farashin
Bayan kowanne amfani, goge jikin aluminium da ƙyalli bushe don cire ƙura. Sanya wani ɗan man ƙasa mai hana tsatsa a kan wire‑grip kafin a adana kayan a cikin jakar Cordura – wannan yana hana tsatsa kuma yana sa grip ya kasance santsi. Farashin fast fid na asali yana tsakanin US $45 zuwa $58, yana ɗan fiye da kayan haɗin gaba ɗaya amma yana ceton lokaci mai yawa a wurin aiki.
Yanzu da kuka san yadda fid rope tool ke farfado da igiyar synthetik, ɓangaren na gaba na tsarin ceto — zaɓin igiyar synthetik ko karfe — zai nuna ribar aiki da za ku iya tsammani daga cikakken ingantaccen kayan.
igiyar winch na ceto – zaɓin synthetik akan karfe
Yanzu da fid rope tool ya nuna muku yadda ake gyara igiya da ta lalace, zaɓin ko igiyar da za a ja zata kasance synthetik na zamani ko wayar karfe ta al'ada. Wannan zaɓi yana shafar kowane ja da za ku yi, daga nauyin da za ku ɗaga zuwa tsarin kulawa da za ku bi.
Idan aka kwatanta igiyar Dyneema mai 12‑zaren da wayar karfe 5/8 in, labarin ƙarfin‑zuwa‑nauyi ya bayyana: igiyar Dyneema na iya zama har sau goma‑biyar mafi ƙarfi fiye da wayar karfe da ke da diamita ɗaya yayin da nauyin ta ke kusan 0.4 lb a kowace kafa idan aka kwatanta da kusan 2 lb a kowace kafa na karfe. Wannan na nufin ƙarancin nauyi a drum ɗin winch, sauƙin ɗauka, da ajiya mai tsari a cikin mota.
Igiyar Synthetik
Ribobin zamani
Sauƙi
Kusan 0.4 lb/ft kawai, yana rage nauyin mota da inganta sarrafawa.
Juyawa a ruwa
Yana tashi a kan ruwa, yana taimakawa wajen ceto a lokacin ketare koguna ko ƙasa mai ruwa.
Mai jure UV
Yana jure lalacewar UV tare da kulawa da ajiya daidai lokacin da ba a amfani da ita.
Wayar Karfe
Rashin amfanin al'ada
Mai nauyi
Kusan 2 lb/ft, yana ƙara nauyin mara amfani ga kayan aiki.
Mai tsatsa
Yana iya tsatsa idan aka fallasa da ruwa, yana buƙatar duba akai‑akai.
Babu tashi a ruwa
Yana nutse nan da nan, yana ƙara haɗarin ɓacewa a cikin ruwa.
Analysin farashi‑per‑pull yana tabbatar da gibin aiki. Igiyar Dyneema mai 12‑zaren da aka sayar da US $260 yawanci tana jure kusan 2 000 ja kafin ta rasa 5 % na ƙarfinta — kusan US $0.13 a kowane ja. A gefe guda, wayar karfe 5/8 in da ke tsada US $120 yawanci tana buƙatar a maye gurbinta bayan ja 500 — kusan US $0.24 a kowane ja. A tsawon yanayin tseren ƙasa na al'ada, synthetik na iya rage farashin kayan aiki da kusan 45 % yayin da yake ba da jan da ya fi laushi da shiru.
Takaddun Shaida & Garanti
iRopes na samar da kayayyaki a ƙarƙashin tsarin gudanar da inganci na ISO 9001 kuma yana ba da garanti na shekara 1 daga kamfanin da ke rufe kura‑kuran. Wannan yana tabbatar da kowace ƙwaya ta cika ƙaƙƙarfan buƙatun aikin ceto na ƙwararru. Tabbatar da sharuddan garanti tare da wakilin tallace‑tallacen ku.
Zaɓar igiyar winch ta ceto da ta dace ba kawai batun farashi ba ne; ya shafi dogon lokaci na amintaccen aiki, sauƙin ɗauka, da kwarin guiwa a cikin masana'antar da ke da takardar shaidar. Tare da igiyar synthetik, fid rope tool da kuka koyi yana iya haɗa sashi da ya lalace a hanya, yayin da kullen da kuka saka a baya ke riƙe layin a drum. Duka biyu suna ƙirƙirar tsarin da ke ba ku damar fuskantar ceto na gaba ba tare da damuwa game da tsagewar igiya ba.
Haɗin tsarin, jagorar siye, da matakai na gaba
Da zarar kun ga yadda kayan kulle igiyar winch, fid rope tool da igiyar winch ta ceto ke aiki daban‑daban, lokaci ya yi da za a yi tunani kan su suna aiki tare. Idan kowanne sashi a sarkar ya dace, duka kayan aiki zai yi aiki kamar tsawo guda ɗaya, amintaccen ƙarfin mota.
Kulle a Drum
kayan kulle igiyar winch yana kulle layin synthetik zuwa drum, yana hana zamewa yayin jan ƙarfi mai girma.
Haɗin Fid
Idan igiya ta lalace, fid rope tool na ƙirƙirar haɗin ido mai tsabta, yana dawo da ƙarfi ba tare da komawa wurin gyara ba.
Igiyar na ɗaukar Nauyi
igiyar winch ta ceto — ko 12‑zaren Dyneema ko 24‑double‑braid — tana ɗaukar jan da santsi saboda ƙarancin ja da juyawa a ruwa.
Lafiyar Tsarin
Da kullen da aka matse daidai, ido da fid‑spliced ya duba, da igiyar synthetik da aka tantance, rig ya amfana da ƙaƙƙarfan inganci na ISO 9001.
Lokacin da kuke fara siyayya, kuyi tunani a cikin rukuni uku na farashi: kasa da $60 don ƙullin aluminium masu inganci, $45–$58 don fid rope tool mai amintacce, da $250–$300 don igiyar Dyneema mai 12‑zaren. Manyan dillalai kamar Factor 55, Amazon da WARN suna lissafa waɗannan abubuwa tare da kimantawa na masu amfani da suka fi taurari huɗu. Idan kuna buƙatar launi na musamman, tsawon ƙarin, ƙirar ƙarshe, ko marufi na alama, iRopes na ba da farashin OEM/ODM tare da masana'anta da aka tantance na ISO da kariyar haƙƙin mallaka.
Shin za a iya gyara wayar karfe da fid? A’a. Fid rope tool an tsara shi don igiyoyin synthetik; karfe na buƙatar haɗin na’ura ko maye gurbin ɓangaren. Yaushe ne ya kamata a sake matse kullen? Bayan kowanne ja goma ko a kowane wata idan an yi amfani da yawa, wanne ya fi girma. Wane torque spec ne ya dace da kullen aluminium? Yawanci 12–15 Nm, yayin da kullen ƙarfe ke buƙatar 18–22 Nm. Koyaushe ku bi umarnin masana'anta.
Sauke Jerin Dubawa na Winch‑Recovery kyauta don tantance kowane sashi kafin ku fita, sannan ku danna “Nemi Farashi” don samun farashi na musamman daga iRopes.
Sami farashi na musamman ko shawarwarin fasaha
Ta haɗa kayan kulle igiyar winch da aka yi daidai da fid rope tool mai amintacce da zaɓin igiyar winch ta ceto mai sauƙi, ISO‑certified, za ku ƙara aminci, rage nauyin mota, kuma ku magance gyare‑gyare a hanya. Wannan jagorar ta haskaka iRopes igiyar winch mai 12‑zaren da igiyar winch 24‑double‑braid a matsayin manyan zaɓuɓɓukan synthetik da ke wuce karfe a ƙarfin‑zuwa‑nauyi da sarrafawa.
Yi amfani da fom ɗin tambaya a sama don tattauna buƙatunku na musamman, kuma za mu taimaka muku zaɓar sassan da suka dace da ƙirƙirar fakiti na musamman da ya dace da rig ɗin ceto.
